There’s an active USB-A to USB-C cable for the Quest 2 VR headset – although it will work with any compatible USB device. It comes in 16.4 and 24.6 feet lengths and features a right-angled USB-C connector so that it’s easy to plug into the Quest 2 while keeping the cable tidied away. It has full USB 3.1 Gen 1 5Gbps bandwidth, giving you

A passive Thunderbolt 3 cable at 0.5M length can push data at 40 Gbps however 1M an 2M can only hit 20 Gbps; the same speed as Thunderbolt 2 and twice the speed of USB. You’ll be able to use passive Thunderbolt 3 cables as USB-C however a USB-C cable cannot be used as a Thunderbolt 3 cable. But to get the raw speed out of Thunderbolt 3 at 40 On the bright side, you can use a USB-C cable and device with a Thunderbolt 3 port, because Thunderbolt 3 has full USB-C support. If you have a USB-C hard drive, for example, you could use it with any of the available Thunderbolt 3 ports on a MacBook Pro. The Daisy Chain Advantage. One of the cooler things only Thunderbolt 3 can do is daisy
Tiger Lake's integrated xHCI controller (the USB 3.2 host) only supports a maximum of 10gbps operation, so Gen 2x1. Same with Burnside. The retimer only supports 10gbps operation when in USB 3.2 mode. In USB4 mode, your total bandwidth will be up to 40Gbps on a Tiger Lake system, but the individual USB devices can be at most 10Gbps.
If all you want to do is charge your HP Spectre x360, Dell XPS 13, or MSI Prestige using its Thunderbolt 4 port, you can just buy a standard USB 2.0, USB-C charging cable. . 279 11 371 235 132 401 385 186

can you use a usb c cable for thunderbolt